Owners Manual

About Your System 13
2 NMI button Used to troubleshoot software and
device driver errors when using certain
operating systems. This button can be
pressed using the end of a paper clip.
Use this button only if directed to do so
by qualified support personnel or by the
operating system's documentation.
3 Video connector Connects a monitor to the system.
4 LCD menu buttons Allows you to navigate the control panel
LCD menu.
5 LCD panel Provides system ID, status information,
and system error messages.
For more information on the LCD
panel, see "LCD Panel Features
(Optional)" on page 14.
NOTE: If the system is connected to
AC power and an error has been
detected, the LCD lights amber
regardless of whether the system
has been powered on.
6 System identification
button
Turns the system ID modes on and off.
The identification buttons on the front
and back panels can be used to locate a
particular system within a rack. When
one of these buttons is pushed, the LCD
panel on the front and the system status
indicator on the chassis back panel light
blue until one of the buttons is pushed
again.
7System status
indicator
Lights blue during normal system
operation. Lights amber when the
system needs attention due to a
problem.
Item Indicator, Button, or
Connector
Icon Description
book.book.book Page 13 Tuesday, September 7, 2010 8:45 PM