Owners Manual

About Your System 23
E1114 Ambient Temp
exceeds
allowed range.
Ambient temperature has
reached a point outside of
the allowed range.
See "Troubleshooting
System Cooling
Problems" on page 143.
E1116 Memory
disabled, temp
above range.
Power cycle
AC.
Memory has exceeded
allowable temperature and
has been disabled to
prevent damage to the
components.
Remove AC power to the
system for 10 seconds and
restart the system.
See "Troubleshooting
System Cooling
Problems" on page 143.
If the problem persists,
see "Getting Help" on
page 161.
E1210 Motherboard
battery
failure. Check
battery.
CMOS battery is missing
or the voltage is outside of
the allowable range.
See "Troubleshooting the
System Battery" on
page 142.
E1216 3.3V Regulator
failure.
Reseat PCIe
cards.
3.3 V voltage regulator has
failed.
Remove and reseat the
PCIe expansion cards.
If the problem persists,
see "Troubleshooting an
Expansion Card" on
page 149.
E1229 CPU # VCORE
Regulator
failure.
Reseat CPU.
Specified processor
VCORE voltage regulator
has failed.
Reseat the processor. See
"Troubleshooting the
Processor" on page 150.
If the problem persists,
see "Getting Help" on
page 161.
E122A CPU # VTT
Regulator
failure.
Reseat CPU.
Specified processor VTT
voltage regulator has
failed.
Reseat the processor. See
"Troubleshooting the
Processor" on page 150.
If the problem persists,
see "Getting Help" on
page 161.
Table 1-1. LCD Status Messages
(continued)
Code Text Causes Corrective Actions
book.book.book Page 23 Tuesday, September 7, 2010 8:45 PM