Owners Manual

Using the System Setup Program and UEFI Boot Manager 69
Deleting or Changing an Existing Setup Password
1 Enter the System Setup program and select the System Security .
2 Highlight Setup Password , press <Enter> to access the setup password
window. Press <Enter> twice to clear the existing setup password.
The setting changes to
Not Enabled .
3 If you want to assign a new setup password, perform the steps in "Assigning
a Setup Password" on page 68.
Embedded System Management
The Unified Server Configurator is an embedded utility that enables systems
and storage management tasks from an embedded environment throughout
the server’s lifecycle.
The Unified Server Configurator can be started during the boot sequence and
can function independently of the operating system.
NOTE: Certain platform configurations may not support the full set of features
provided by Unified Server Configurator.
The following features of Unified Server Configurator are supported on
systems with Baseboard Management Controller (BMC):
• Installing an operating system
• Running diagnostics to validate the memory, I/O devices, processor,
physical disks, and other peripherals
When an optional iDRAC6 Express card is installed, Unified Server
Configurator provides the following additional features:
• Downloading and applying firmware updates
• Configuring hardware and firmware
For more information about setting up Unified Server Configurator,
configuring hardware and firmware, and deploying the operating system, see
the Unified Server Configurator documentation on the Dell Support website
at support.dell.com/manuals.
book.book.book Page 69 Tuesday, September 7, 2010 8:45 PM