Owners Manual

90 Installing System Components
Figure 3-8. Removing and Installing an Expansion Card
9 Connect any cables to the expansion card.
10 Close the system. See "Closing the System" on page 77.
11 If applicable, replace the front bezel. See "Installing the Front Bezel" on
page 75.
12 Reconnect the system to its electrical outlet and turn the system on,
including any attached peripherals.
1 expansion-card latch 2 expansion card
3 filler bracket 4 expansion-card riser
2
1
4
3
book.book.book Page 90 Tuesday, September 7, 2010 8:45 PM