Users Guide

Setting Up the DX Object Storage Platform 23
Using the Dell DX Content Router Rules Configurator
The CRRC runs on a DX Cluster Services Node (CSN) in a DX Storage
cluster. It configures the rules.xml file located at
/etc/caringo/contentrouter/rules.xml. For more information on the rule sets,
see the Content Router Setup and Configuration Guide at support.dell.com.
To configure the DX content router rules using the CRRC:
1
Start the CRRC, by running the command at the installation path
(
/opt/dell/crrc ):
./run_crrc.sh
The Home screen is displayed.
2 In the Home screen, select the type of rule set that you want the content
router to use.
NOTE: By default, the Fast rule set is used by the content router.
NOTE: After you configure the cluster-level compressions using CRRC,
configure the Compressor node. For more information, see "Appendix A.3" in
the DX Storage Compression Software Administrator's Guide at
support.dell.com/manuals.
3 You can select from a list of Pre-defined rule sets , create a Custom rule set ,
or
Modify current rule set and click Next .
The
Editor screen is displayed. You can view the Main tab and XML tab
on the
Editor screen. On the Main tab you can:
•Add Group
•Add Channel
•Add filter
• Delete
• Set OR condition
• Reset
• Modify existing filter node
NOTE: If you select Modify current rule set, proceed to step 4.
4 To modify an existing Filter node, select the relevant filter node.
The
Filter editor frame displays the selected filter node details.
book.book Page 23 Monday, October 17, 2011 3:42 PM