Users Guide
Table Of Contents
- Table of Contents
- Chapter 1: Introduction
- Chapter 2: Installing and Uninstalling
- Chapter 3: Configuration
- 3.1 FC Driver Configuration
- 3.2 vPort Configuration
- 3.3 FC Driver Performance Tuning
- Chapter 4: Configuring NVMe over FC
- Chapter 5: Troubleshooting
- Appendix A: FCP Driver BlockGuard Functionality
- Appendix B: Configuring NVMe over FC on a Target
- Appendix C: Native NVMe Multipathing
- Appendix D: Trunking Support
- Appendix E: FC-SP-2 Authentication (DH-CHAP) Support
- Appendix F: ARM Support
Broadcom DRVLin-UG128-100
86
Emulex Drivers for Linux User Guide
2011: Unable to allocate memory for issuing SLI_CONFIG_SPECIAL mailbox command
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2012: Mailbox failed , mbxCmd <mbx_cmd> READ_CONFIG, mbxStatus <mbx status>
The READ_CONFIG mailbox command failed.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2013: Could not manually add FCF record 0, status <rc>
Could not add an FCF record to the FCF list.
Data: None
Severity: Error
Log: LOG_MBOX, LOG_SLI
Action: None required.
2014: Invalid command <iocb.ulpCommand>
The IOCB command is invalid.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2015: Invalid CT %x command <iocb.ulpCommand>
Invalid command type in the IOCB is not supported.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
2017: REG_FCFI mbxStatus error <mbx status> HBA state <port_state>
The REG_FCFI mailbox command failed.
Data: None
Severity: Error
Log: LOG_MBOX
Action: None required.
2018: REG_VFI mbxStatus error <mbx status> HBA state <port_state>
The REG_VFI mailbox command failed.
Data: None
Severity: Error
Log: LOG_MBOX
Action: None required.
2022: VPI Mailbox failed status <status>, mbxStatus <mbxStatus>
The INIT-VPI mailbox command failed.
Data: None
Severity: Error
Log: LOG_SLI
Action: None required.
Table 8: FC Error Log Messages and Their Descriptions (Continued)