Users Guide
Table Of Contents
- Table of Contents
- Chapter 1: Introduction
- Chapter 2: Installing and Uninstalling
- Chapter 3: Configuration
- 3.1 FC Driver Configuration
- 3.2 vPort Configuration
- 3.3 FC Driver Performance Tuning
- Chapter 4: Configuring NVMe over FC
- Chapter 5: Troubleshooting
- Appendix A: FCP Driver BlockGuard Functionality
- Appendix B: Configuring NVMe over FC on a Target
- Appendix C: Native NVMe Multipathing
- Appendix D: Trunking Support
- Appendix E: FC-SP-2 Authentication (DH-CHAP) Support
- Appendix F: ARM Support
Broadcom DRVLin-UG128-100
88
Emulex Drivers for Linux User Guide
2506: CQ_DESTROY mailbox failed with status <shdr_status> add_status <shdr_add_status>, mbx status
<rc>
The mailbox command sent to delete the completion queue failed.
Data: None
Severity: Error
Log: LOG_INIT
Action: None required.
2507: MQ_DESTROY mailbox failed with status <shdr_status> add_status <shdr_add_status>, mbx status
<rc>
The mailbox command sent to delete the mailbox queue failed.
Data: None
Severity: Error
Log: LOG_INIT
Action: None required.
2508: WQ_DESTROY mailbox failed with status <shdr_status> add_status <shdr_add_status>, mbx status
<rc>
The mailbox command sent to delete the work queue failed.
Data: None
Severity: Error
Log: LOG_INIT
Action: None required.
2509: RQ_DESTROY mailbox failed with status <shdr_status> add_status <shdr_add_status>, mbx status
<rc>
The mailbox command sent to delete the work queue failed.
Data: None
Severity: Error
Log: LOG_INIT
Action: None required.
2510: RQ_DESTROY mailbox failed with status <shdr_status> add_status <shdr_add_status>, mbx status
<rc>
The mailbox command sent to delete the work queue failed.
Data: None
Severity: Error
Log: LOG_INIT
Action: None required.
2511: POST_SGL mailbox failed with status <shdr_status> add_status <shdr_add_status>, mbx status
<rc>n
The mailbox command sent to post the SGL pages to the firmware failed.
Data: None
Severity: Error
Log: LOG_INIT
Action: None required.
2512 - MODIFY_EQ_DELAY mailbox failed with status x%x add_status x%x, mbx status x%x
The mailbox command sent to modify EQ delay failed.
Data: None
Severity: Error
LOG: LOG_INIT
Action: None required.
Table 8: FC Error Log Messages and Their Descriptions (Continued)