Emulex® Drivers for Windows Quick Installation Guide Release 12.
Broadcom, the pulse logo, Connecting everything, Avago Technologies, Avago, the A logo, Emulex, OneCommand, and OneConnect are among the trademarks of Broadcom and/or its affiliates in the United States, certain other countries, and/ or the EU. Copyright © 2003–2020 Broadcom. All Rights Reserved. The term “Broadcom” refers to Broadcom Inc. and/or its subsidiaries. For more information, please visit www.broadcom.com.
Emulex Drivers for Windows Quick Installation Guide Table of Contents Chapter 1: Introduction ...................................................................................................................... 4 Chapter 2: Installation ........................................................................................................................ 5 2.1 Using the OneInstall Kit.........................................................................................................................
Emulex Drivers for Windows Quick Installation Guide Chapter 1: Introduction This product supports the following Emulex® adapters: LPe12000-series adapters LPe16000-series adapters LPe31000-series adapters LPe32000-series adapters LPe35000-series adapters Broadcom DRVWin-IG128-100 4
Emulex Drivers for Windows Quick Installation Guide Chapter 2: Installation NOTE: The Emulex OneCommand® Manager application has been renamed as the Emulex HBA Manager application. Emulex drivers for Windows are available in two types of packages: The OneInstall driver and application kit contains the Emulex Storport Miniport driver and the Emulex HBA Manager application in a single download package.
Emulex Drivers for Windows Quick Installation Guide 2.1.2 Loading the OneInstall Kit Using Silent Mode You can perform a Silent mode installation from a batch file or from the command line. If you run OneInstall from a batch file or from a command line prompt, the default Windows behavior starts OneInstall and then immediately continues with the next command. As a result, the value of %ERRORLEVEL% will always be 0 because Windows successfully started OneInstall Installer.
Emulex Drivers for Windows Quick Installation Guide The following are examples of Silent mode commands: Start Start Start Start Start /wait /wait /wait /wait /wait OneInstall-Setup-.exe OneInstall-Setup-.exe OneInstall-Setup-.exe OneInstall-Setup-.exe OneInstall-Setup-.exe /q2 /q2 /q2 /q2 /q2 ALL=1 FC=1 OCM=1 ALLCORE=1 OCMCORE=1 2.2 Loading the Driver Kit The driver kit unpacks the selected Emulex drivers and applications onto your computer.
Emulex Drivers for Windows Quick Installation Guide NOTE: Refer to the Emulex Software Kit Migration User Guide for information about installing drivers on a system that contains a mix of OneConnect® adapters and FC HBAs. Driver diagnostics – Determines whether the driver is operating properly. Silent installation mode – Suppresses all screen output (necessary for unattended installation).
Emulex Drivers for Windows Quick Installation Guide 2.3.2.1 Option 1: Automatically Run AutoPilot Installer Use this option unless you have specific configuration requirements. 1. Double-click the driver kit or run it from a command line. The command line parameter APargs allows you to specify arguments that are automatically passed to the AutoPilot Installer command.
Emulex Drivers for Windows Quick Installation Guide 2.3.3 Hardware-First Installation or Driver Update The driver kit installer must be downloaded from the Broadcom website and installed before performing this installation. NOTE: To update an Emulex protocol driver, begin this procedure at Step 2. To perform a hardware-first installation, perform the following steps: 1. Install a new Emulex adapter and power on the system.
Emulex Drivers for Windows Quick Installation Guide Figure 1: AutoPilot Installer Popup (Software-First Installation) 2. Click OK. A Welcome window is displayed. 3. Click Next. The installation automatically progresses. After the installation is successful, the Finish window is displayed. 4. View or print a report, if desired. – View Installation Report – The installation report is a text file with the current Emulex adapter inventory, configuration information, and task results.
Emulex Drivers for Windows Quick Installation Guide Chapter 3: Installation Failure The two possible installation failures are described in this chapter. 3.1 AutoPilot Installer Failure If AutoPilot Installer fails, the Diagnostics window displays a message indicating that the adapter failed. If the adapter fails, perform the following steps: 1. Select the adapter to view the reason why the adapter failed. The reason and suggested corrective action are displayed. 2.
