Administrator Guide

Figure 80. Multicast with ECMP
Implementation Information
Because protocol control traffic in Dell Networking OS is redirected using the MAC address, and multicast
control traffic and multicast data traffic might map to the same MAC address, Dell Networking OS might
forward data traffic with certain MAC addresses to the CPU in addition to control traffic.
As the upper5 bits of an IP Multicast address are dropped in the translation, 32 different multicast group
IDs all map to the same Ethernet address. For example, 224.0.0.5 is a known IP address for open shortest
path first (OSPF) that maps to the multicast MAC address 01:00:5e:00:00:05. However, 225.0.0.5,
226.0.0.5, and so on, map to the same multicast MAC address. The Layer 2 forwarding information base
(FIB) alone cannot differentiate multicast control traffic multicast data traffic with the same address, so if
you use IP address 225.0.0.5 for data traffic, both the multicast data and OSPF control traffic match the
same entry and are forwarded to the CPU. Therefore, do not use well-known protocol multicast
addresses for data transmission, such as the following.
Protocol Ethernet Address
OSPF
01:00:5e:00:00:05
01:00:5e:00:00:06
RIP 01:00:5e:00:00:09
NTP 01:00:5e:00:01:01
VRRP 01:00:5e:00:00:12
Multicast Features
527