Administrator Guide

Displaying a DSCP Color Policy Configuration
To display the DSCP color policy configuration for one or all interfaces, use the show qos dscp-
color-policy {summary [interface] | detail {interface}} command in EXEC mode.
summary: Displays summary information about a color policy on one or more interfaces.
detail: Displays detailed color policy information on an interface
interface: Enter the name of the interface that has the color policy configured.
Examples for Displaying a DSCP Color Policy
Display summary information about a color policy for one or more interfaces.
Dell# show qos dscp-color-policy summary
Interface dscp-color-map
TE 0/10 mapONE
TE0/11 mapTWO
Display summary information about a color policy for a specific interface.
Dell# show qos dscp-color-policy summary te 0/10
Interface dscp-color-map
TE 0/10 mapONE
Display detailed information about a color policy for a specific interface
Dell# show qos dscp-color-policy detail te 0/10
Interface TenGigabitEthernet 0/10
Dscp-color-map mapONE
yellow 4,7
red 20,30
Creating Output Policy Maps
Creating output policy maps is supported on the Z9000 platform.
1. Create an output policy map.
CONFIGURATION mode
policy-map-output
2. After you create an output policy map, do one or more of the following:
Applying an Output QoS Policy to a Queue
Specifying an Aggregate QoS Policy
Applying an Output Policy Map to an Interface
3. Apply the policy map to an interface.
Applying an Output QoS Policy to a Queue
To apply an output QoS policy to a queue, use the following command.
• Apply an output QoS policy to queues.
INTERFACE mode
652
Quality of Service (QoS)