Administrator Guide

Protocol MAC
testadmin netadmin Exec Config Interface Line Router IP Routemap
Protocol MAC
Displaying Role Permissions Assigned to a Command
To display permissions assigned to a command, use the show role command in EXEC Privilege mode.
The output displays the user role and or permission level.
Examples of Role Permissions Assigned to a Command
Dell#show role mode ?
configure Global configuration mode
exec Exec Mode
interface Interface configuration mode
line Line Configuration mode
route-map Route map configuration mode
router Router configuration mode
Dell#show role mode configure username
Role access: sysadmin
Dell##show role mode configure password-attributes
Role access: secadmin,sysadmin
Dell#show role mode configure interface
Role access: netadmin, sysadmin
Dell#show role mode configure line
Role access: netadmin,sysadmin
Displaying Information About Users Logged into the Switch
To display information on all users logged into the switch, using the show users command in EXEC
Privilege mode. The output displays privilege level and/or user role. The mode is displayed at the start of
the output and both the privilege and roles for all users is also displayed. If the role is not defined, the
system displays "unassigned" .
Example of Displaying Information About Users Logged into the Switch
Dell#show users
Authorization Mode: role or privilege
Line User Role Privilege Host(s) Location
0 console 0 admin sysadmin 15 idle
*3 vty 1 sec1 secadmin 14 idle 172.31.1.4
4 vty 2 ml1 netadmin 12 idle 172.31.1.5
738
Security