Administrator Guide

• When you query an icmpStatsInErrors object in the icmpStats table by using the snmpget or
snmpwalk command, the output for IPv4 addresses may be incorrectly displayed. To correctly display
this information under IP and ICMP statistics, use the
show ip traffic command.
• When you query an IPv4 icmpMsgStatsInPkts object in the ICMP table by using the snmpwalk
command, the echo response output may not be displayed. To correctly display ICMP statistics, such
as echo response, use the show ip traffic command.
Simple Network Management Protocol (SNMP)
789