Administrator Guide

directly connected ports
Warning - It is highly recommended to reboot the system after Offline
Diagnostics
Proceed with Diags [confirm yes/no]: y
00:37:32: %Z9000:0 %DIAGAGT-6-DA_DIAG_STARTED: Starting diags on stack unit 0
Dell#00:37:32 : Approximate time to complete the Diags ... 1 Min 30 Sec
Dell#
WARNING: Reboot is highly recommended after running Offline Diagnostics in
Debug Mode. Debug Mode can be
used only for troubleshooting specific test issue.
The following example shows the show diag information command.
Dell#
Dell#show diag information -
Diag information:
Diag software image version:
9-0-0-23
-------------------------------------------------------------------
Stack-unit Member 0: Unit diags are done (Stackunit Offline).
Stack-unit Member 1: Not present.
Stack-unit Member 2: Not present.
Stack-unit Member 3: Not present.
Stack-unit Member 4: Not present.
Stack-unit Member 5: Not present.
Stack-unit Member 6: Not present.
Stack-unit Member 7: Not present.
-------------------------------------------------------------------
The following example shows the show diag stack-unit command.
Dell#show diag stackunit 0
Diag status of Stackunit member 0:
------------------------------------------------------------------
Stackunit is currently offline.
Stackunit level2 diag issued at Thu Apr 09, 2009 02:40:13 PM.
Current diag status: Unit diags are done.
Duration of execution (Total): 8 min 11 sec.
Diagonostic test results located: /f10/flash/TestReport-SU-0.txt
--------------------------------------------------------------------
CPU Version : Intel I386
Stack Unit Board temperature : 30 Degree C
Stack Unit Number : 0
Serial Number : Z1FX111100005
Part Number : 7520051802
Product Revision : 02
Version : 8-3-11-631
--More-
TRACE Logs
In addition to the syslog buffer, to report hardware and software events and status information, Dell
Networking OS buffers trace messages which are continuously written by various Dell Networking OS
software tasks.
Each TRACE message provides the date, time, and name of the Dell Networking OS process. All messages
are stored in a ring buffer that you can save to a file either manually or automatically after failover.
Z-Series Debugging and Diagnostics
913