Administrator Guide

txError :0
txReqTooLarge :0
txInternalError :0
txDatapathErr :0
txPkt(COS0) :0
txPkt(COS1) :0
txPkt(COS2) :0
txPkt(COS3) :0
txPkt(COS4) :0
txPkt(COS5) :0
txPkt(UNIT0) :0
txPkt(UNIT1) :0
txPkt(UNIT2) :0
txPkt(UNIT3) :0
Dell#sh hardware stack-unit 2 cpu party-bus statistics
Input Statistics:
27550 packets, 2559298 bytes
0 dropped, 0 errors
Output Statistics:
1649566 packets, 1935316203 bytes
0 errors
Displaying Stack Member Counters
The show hardware stack-unit 0–7 {counters | details | port-stats [detail] |
register}
command displays internal receive and transmit statistics, based on the selected command
option.
•
Displaying Stack Unit Counters
RIPC4.ge0 : 1,202 +1,202
RUC.ge0 : 1,224 +1,217
RDBGC0.ge0 : 34 +24
RDBGC1.ge0 : 366 +235
RDBGC5.ge0 : 16 +12
RDBGC7.ge0 : 18 +12
GR64.ge0 : 5,176 +24
GR127.ge0 : 1,566 +1,433
GR255.ge0 : 4 +4
GRPKT.ge0 : 1,602 +1,461
GRBYT.ge0 : 117,600 +106,202
GRMCA.ge0 : 366 +235
GRBCA.ge0 : 12 +9
GT64.ge0 : 4 +3
GT127.ge0 : 964 +964
GT255.ge0 : 4 +4
GT511.ge0 : 1 +1
GTPKT.ge0 : 973 +972
GTBCA.ge0 : 1 +1
GTBYT.ge0 : 71,531 +71,467
RUC.cpu0 : 972 +971
TDBGC6.cpu0 : 1,584 +1,449=
Enabling Application Core Dumps
Application core dumps are disabled by default. A core dump file can be very large. Core dumps are
stored in the local flash.
To enable core dumps, use the following command.
926
Z-Series Debugging and Diagnostics