System information

Stacking PowerConnect 10G Switches: M8024-k, 8024, 8024F

5. After login, the first screen to appear will be the Home screen which shows ports 17 thru 20

are available for stacking. The current stacking member number is also displayed on this

screen. Before stacking, all single membersl have the Stack number of 1.

6. Click System > Stack Management > Stack Port Summary to bring up the next page used to

select the ports for stacking. For this example ports 17 and 18 are used.

7. Clicking the box in the Edit column activates the pull-down menu in the Configured Stack-mode

column. Use this menu to change each ports mode from Ethernet to Stack.

8. Click Apply.

If the message below appears, click Close. The switch will not reboot until the reload command is

given.