System information

Stacking PowerConnect 10G Switches: M8024-k, 8024, 8024F
54
2. Click Apply.
3. From the stack, create a link-up or link-down on any port for two to three seconds by either
plugging in or unplugging a cable, then reversing the action. For this example, port 17 is used
on one of the three stack members.
4. Select System > Logs > RAM Log. Check the log for a Link Down trap for port 17.
The log will identify both the Unit and Port that was used in the link operation. For this example,
Te2/0/17 means Stack Unit 2, module 0, and port 17. The Te means it is a Ten Gigabit port. It is now
known that the port that was unplugged is from Unit #2.