Owner's manual

Table Of Contents
Using the On-Screen Display
The projector has a multi-language On-Screen Display (OSD) Menu that
can be displayed with or without an input source.
Press the Menu button on the control panel or the remote control to enter
the Main Menu.
To select an option, press the or buttons on your projector’s control
panel or remote control.
Use the or buttons on the control panel or remote control to adjust
the settings.
To exit the OSD, press the
Menu
button directly on the control panel or the
remote control.
INPUT SOURCE
The Input Source menu allows you to select your projector's input source.
INTEL
®
WIDIPress to access
the projector's Intel
®
WiDi Guide
screen (the default).
WI-FIPress to access the
projector's Wireless Guide screen.
DOUSB—Allows you to display the
computer/laptop screen to your
projector via the USB cable.
NOTE: If the DoUSB can not display, please see "Troubleshooting" on
page 71.
HDMI—Press to detect a HDMI signal.
USB—Allows you to playback the photo, music, or video files from your
USB flash disk. See "Multimedia Introduction" on page 35.
SD—Allows you to playback the photo, music, or video files from your SD
card. See "Multimedia Introduction" on page 35.
INTERNAL MEMORYAllows you to playback the photo, music, or video
files from internal memory of the projector. See "Multimedia Introduction"
on page 35.
NOTE:
S
TORAGE MODE
You may also connect USB cable in Internal Memory
source to execute copy, delete, move and more instructions from your
computer to projector internal memory and SD card.
Using Your Projector 25