Owner's manual
Table Of Contents
- Contents
- Your Dell Projector
- Connecting Your Projector
- Using Your Projector
- Turning Your Projector On
- Turning Your Projector Off
- Adjusting the Projected Image
- Adjusting the Projector Focus
- Adjusting Projection Image Size
- Using the Control Panel
- Using the Remote Control
- Installing the Remote Control Battery
- Operating Range with Remote Control
- Using the On-Screen Display
- Multimedia Introduction
- Photo Format
- Video Format
- Music Format
- How to set-up File Type for Multimedia with USB
- How to set-up File Type for Multimedia with SD Card
- How to set-up File Type for Multimedia with Internal Memory
- Office Viewer for the USB, SD, and Internal Memory
- Buttons Introduction
- Multimedia SETUP for USB, SD Card, and Internal Memory
- Intel® Wireless Display (WiDi) Installation
- Wi-Fi Display Installation
- Managing the Projector From Web Management
- Make Application Token
- Troubleshooting Your Projector
- Specifications
- Contacting Dell
- Appendix: Glossary
FACTORY RESET—
Select Confirm and press to reset all
settings to its factory default. The below warning message
appears:
Reset items include both computer sources and Video source
settings.
MENU SETTINGS—
Select and press to activate the menu settings. The
menu settings consists of the following options:
MENU POSITION—
Allows you to change the position of the
OSD menu on the screen.
MENU TIMEOUT—
Allows you to adjust the time for an OSD
timeout. By default, the OSD disappears after 20 seconds of
non-activity.
MENU TRANSPARENCY—
Select to change the transparency level
of the OSD background.
MENU LOCK—
Select
On
to enable Menu Lock and hide the
OSD menu. Select
Off
to disable the Menu Lock. If you want to
disable the Menu Lock function and have the OSD disappear,
press the Menu button on the control panel or remote control
for 15 seconds, then disable the function.
PASSWORD—
When Password Protect is enabled, a Password
Protect screen requesting you to enter a password will be
displayed when the power plug is inserted into the electrical
outlet and the power for the projector is first turned on. By
default, this function is disabled. You can enable this feature by
selecting Enable. If the password has been set before, key in
the password first and select the function. This password
Using Your Projector 30