Reference Guide

Table 13. show interface ets detail Command Description (continued)
Field Description
ETS TLV Statistic: Input Conf TLV pkts Number of ETS Configuration TLVs received.
ETS TLV Statistic: Output Conf TLV pkts Number of ETS Configuration TLVs transmitted.
ETS TLV Statistic: Error Conf TLV pkts Number of ETS Error Configuration TLVs received.
The following example shows the show linecard 2 port-set 0 backplane all pfc details command.
Dell#show linecard 2 port-set 0 backplane all pfc details
2 port-set 0 backplane all
Admin mode is On
Admin is enabled, Priority list is 3
Local is enabled, Priority list is 3
Link Delay 65535 pause quantum
0 Pause Tx pkts, 0 Pause Rx pkts
The following example shows the show linecard 2 port-set 0 backplane all ets details command.
Dell#sh linecard 2 port-set 0 backplane all ets details
linecard 2 port-set 0 backplane all
Max Supported PG is 4
Number of Traffic Classes is 8
Admin mode is on
Admin Parameters:
--------------------
Admin is enabled
PG-grp Priority# Bandwidth TSA
------------------------------------------------
0 0,1,2,4,5,6,7 50 % ETS
1 3 50 % ETS
2 - -
3 - -
4 - -
5 - -
6 - -
7 - -
The following example shows the show sfm 0 backplane all pfc details command
Dell#show sfm 0 backplane all pfc details
sfm 0 backplane all
Admin mode is On
Admin is enabled, Priority list is 3
Local is enabled, Priority list is 3
Link Delay 65535 pause quantum
0 Pause Tx pkts, 0 Pause Rx pkts
The following example shows the show sfm 0 backplane all ets details command
Dell#sh sfm 0 backplane all ets details
sfm 0 backplane all
Max Supported PG is 4
Number of Traffic Classes is 8
Admin mode is on
Admin Parameters:
--------------------
Admin is enabled
PG-grp Priority# Bandwidth TSA
------------------------------------------------
0 0,1,2,4,5,6,7 50 % ETS
1 3 50 % ETS
Data Center Bridging (DCB)
231