Reference Guide

Feature and Functionality Dell Networking OS Release
Introduction
Documentation and Chapter Location
Z9000
IPv6 BGP MD5 Authentication 8.3.11 IPv6 BGP in the Dell Networking OS
Command Line Reference Guide.
IS-IS for IPv6 8.3.11 Intermediate System to Intermediate
System
IPv6 IS-IS in the Dell Networking OS
Command Line Reference Guide.
IS-IS for IPv6 support for redistribution 8.3.11 Intermediate System to Intermediate
System
IPv6 IS-IS in the Dell Networking OS
Command Line Reference Guide.
ISIS for IPv6 support for distribute lists
and administrative distance
8.3.11 Intermediate System to Intermediate
System
IPv6 IS-IS in the Dell Networking OS
Command Line Reference Guide.
OSPF for IPv6 (OSPFv3) 8.3.11 OSPFv3 in the Dell Networking OS
Command Line Reference Guide.
Equal Cost Multipath for IPv6 8.3.11
IPv6 Services and Management
Telnet client over IPv6 (outbound
Telnet)
8.3.11 Configuring Telnet with IPv6
Control and Monitoring in the Dell
Networking OS Command Line Reference
Guide.
Telnet server over IPv6 (inbound
Telnet)
8.3.11 Configuring Telnet with IPv6
Control and Monitoring in the Dell
Networking OS Command Line Reference
Guide.
Secure Shell (SSH) client support over
IPv6 (outbound SSH) Layer 3 only
8.3.11 Secure Shell (SSH) Over an IPv6
Transport
Secure Shell (SSH) server support over
IPv6 (inbound SSH) Layer 3 only
8.3.11 Secure Shell (SSH) Over an IPv6
Transport
IPv6 Access Control Lists 8.3.11 IPv6 Access Control Lists in the Dell
Networking OS Command Line Reference
Guide.
IPv6 Multicast
MLDv1/v2 N/A
IPv6 PIM in the Dell Networking OS
Command Line Reference Guide.
Configuring the LPM Table for IPv6 Extended Prefixes
The LPM CAM table consists of two partitions: Partition I for IPv6 /65-/128 route-prefix entries and Partition II for IPv6
0/0-/64 and IPv4 0/0-0/32 route-prefix entries. You must reconfigure LPM CAM to allow IPv6 /65-/128 route prefixes to be
stored in Partition I.
Use the cam-ipv6 extended-prefix command to enable IPv6 /65-/128 route prefixes to be stored in LPM CAM
Partition 1. You must specify the maximum number of IPv6 prefixes with /65-/128 mask length that are supported in the
388
IPv6 Routing