Installation manual

Storing Components

If you do not install your Z9500 and components immediately, Dell Networking recommends properly

storing the system and all optional components until you are ready to install them.

WARNING: ESD damage can occur when components are mishandled. Always wear an ESD-

preventive wrist or heel ground strap when handling the Z9500 and its accessories. After you

remove the original packaging, place the Z9500 and its components on an anti-static surface.

1. Storage temperature must remain constant ranging from -4° to 158° F (-20°C to 70° C).

2. Store on a dry surface or floor, away from direct sunlight, heat, and air conditioning ducts.

3. Store in a dust-free environment.

Site Preparation