Installation manual

Mounting the Chassis in a Four-Post Rack

Safety Considerations for Rack Mounting

WARNING: You must use a lifting device, such as a fork-lift trolley, to lift the chassis.

The following guidelines are general safety considerations. For detailed information, read the safety

instructions in your Safety, Environmental, and Regulatory information booklet before you begin.

• Rack loading — Overloading or uneven loading of racks may result in shelf or rack failure, which may

damage equipment and cause possible personal injury. Stabilize racks in a permanent location before

loading begins. Mount the components beginning at the bottom of the rack, then work to the top. Do

not exceed your rack load rating.

• Power considerations — Connect only to the power source specified on the unit. When multiple

electrical components are installed in a rack, ensure that the total component power ratings do not

exceed the circuit capabilities. Overloaded power sources and extension cords present fire and shock

hazards.

Z9500 Installation