Installation manual

3. Tighten the screws on each side of the front panel.

NOTE: If your 1070 mm rack enclosure uses vertical power distribution units (PDUs) that occupy the

space required by the Z9500 when it is installed 6 inches from the front door, do one of the

following:

• Replace the vertical PDUs with shorter or horizontal PDUs.

• Use an extended-length (1200 mm) rack.

Installing the Z9500 in a Rack Enclosure with No Back Door

1. Top view of rack enclosure (for example, Dell

4226 – 1070 mm cabinet)

2. Adjustable front vertical rails

3. 6 inches behind front door 4. Back door has been removed.

Z9500 Installation