Users Guide

124 Installing Upgrades
www.dell.com | support.dell.com
Ensure that the rail tabs are positioned at the back of the hard drive.
NOTICE: Do not install a drive into the lower hard-drive bay until you remove
the green drive rails from inside the lower hard-drive bay.
6
Remove the first hard drive from the upper bay and install it in the
lower bay.
a Disconnect the power cable and the data cable from the back of
the first hard drive.
b Press in the two green rail tabs and pull the first hard drive out of
the upper bay.
c Gently slide the first hard drive into the lower bay until you hear a
click.
d Reconnect the power cable and the data cable to the back of the
hard drive.
7 Gently slide the new hard drive into the upper bay until you hear a
click.
Second Hard Drive Installed
1
2
4
3