Users Guide

132 Installing Upgrades
www.dell.com | support.dell.com
Installing a Floppy Drive and Reattaching Cables
Small Form-Factor Computer
1 Snap the replacement floppy drive into the sled and ensure that it is
secure in the sled.
2 Gently slide the floppy drive into the computer until the tabs securely
click into position.
3 Connect the interposer board to the floppy drive.
a Slide the drive cable into the connector.
b Close the lever so that the cable is secure in the connector.
c Line up the hole on the bottom of the interposer board with the
notch on the connector, and snap the interposer board onto the
drive.
4 Attach the power cable to the interposer board on the floppy drive.
5 Attach the CD/DVD drive cable and the power cable to the CD/DVD
drive.
6 Connect the floppy-drive cable to the DSKT connector on the system
board.