Service Manual

30 Badge
www.dell.com | support.dell.com
Removing the Badge
Small Form-Factor Computer
1 Open the computer cover.
2 Using a flat-blade screwdriver, release the tabs from the inside of the
computer and remove the plastic computer cover from the metal
component.
Computer Cover Removal
3
Remove the accent door by pressing the middle of the door while
lifting away the sides of the door.
4 From inside the front bezel, push in on the two tabs on either side of
the badge to release the badge.
5 Press on the badge until it is freed.
1 Tabs (2 on each side)
1