Service Manual

124 Microprocessor

www.dell.com | support.dell.com

Heat Sink/Blower Assembly Removal—Small Form-Factor

and Small Desktop Computers

NOTICE: Before you remove the heat sink, gently rock the heat sink, and then

slightly twist it as you lift it from the system board.

Lift the heat sink or heat sink/blower assembly away from the

microprocessor.

7 On the small form-factor and small desktop computers, remove the

two screws on the blower to remove it from the heat sink.

1 Latches (2) 4 Screws (2)

2 Securing clips (2) 5 Heat sink

3 Blower 6 Retention base