User's Manual

126 Installing Upgrades

www.dell.com | support.dell.com

Detaching Floppy Drive Cables

1 Disconnect the cables from the floppy drive and system board.

2 Disconnect the CD/DVD drive cable and the power cable from the

CD/DVD drive.

3 On the small form-factor computer, remove or raise the drive by

pressing the green tabs on either side of the drive and lifting the drive

up.

a Remove the interposer board from the floppy drive by pressing the

tab and rotating the interposer board.

Small Form-Factor Computer

b To release the cable from the connector, slide the lever until it is

fully extended and then lift the cable away.

1 floppy drive cable

2tab

3 interposer board

4 system board floppy drive connector (DSKT)