User Manual
Table Of Contents
- Safety instructions
- About your monitor
- Setting up the monitor
- Connecting the stand
- Using the tilt, swivel, and vertical extension
- Rotating the Display (C2422HE/C2722DE only)
- Configuring the display settings on your computer after rotation (C2422HE/C2722DE only)
- Operating the monitor webcam
- Connecting your monitor
- Dell Power Button Sync (DPBS)
- Organizing your cables
- Securing your monitor using Kensington lock (optional)
- Removing the monitor stand
- Wall mounting (Optional)
- Operating the monitor
- Troubleshooting
- Appendix
110 | Troubleshooting
Problem What you
experience
Possible solutions
Intermittent
charging
when using
USB Type-C
connection to
computer,
laptop, and so
on
Intermittent
charging
• Check if the maximum power consumption of
device is over 90 W.
• Ensure that you use only Dell approved adapter
or the adapter that comes with the product.
• Ensure that the USB Type-C cable is not
damaged.
No image when
using USB
Type-C MST
Blank screen or
2nd DUT is not
Prime mode
• USB Type-C input, Go to OSD menu, under
Display Info check the Link Rate is HBR2 or
HBR3, if Link Rate is HBR2, suggest to use USB
Type-C to DP cable to turn on MST.
No network
connection
Network
dropped or
Intermittent
• Do not toggle O/On the power button when
network is connected, keeps the power button
On.
The LAN port is
not functioning
OS setting or
cable connection
issue
• Ensure that the latest BIOS and drivers for your
computer are installed on your computer.
• Ensure that the RealTek Gigabit Ethernet
Controller is installed in the Windows Device
Manager.
• If your BIOS Setup has a LAN/GBE Enabled/
Disabled option, make sure it is set to Enabled.
• Ensure that the Ethernet cable is connected
securely on the monitor and the hub/router/
rewall.
• Check the status LED of the Ethernet cable to
conrm connectivity. Re-connect both ends of
the Ethernet cable if the LED is not lit.
• First power o the Computer and unplug the
Type-C cable and power cord of the monitor.
Then, power on the computer, plug in the
monitor power cord and Type-C cable.