User Manual
Table Of Contents
- Safety instructions
- About your monitor
- Setting up the monitor
- Connecting the stand
- Using the tilt, swivel, and vertical extension
- Rotating the Display (C2422HE/C2722DE only)
- Configuring the display settings on your computer after rotation (C2422HE/C2722DE only)
- Operating the monitor webcam
- Connecting your monitor
- Dell Power Button Sync (DPBS)
- Organizing your cables
- Securing your monitor using Kensington lock (optional)
- Removing the monitor stand
- Wall mounting (Optional)
- Operating the monitor
- Troubleshooting
- Appendix
Operating the monitor | 85
If either USB Type-C / DP / HDMI input is selected and the corresponding cable is not
connected, a floating dialog box as shown below appears.
No DP Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/C24/27/3422XE
or
No USB-C Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/C24/27/3422XE
or
No HDMI Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/C24/27/3422XE
When the webcam module pop out, the the following message will appear:
Webcam + Mic: Enable
When the webcam module pop in (retracted), the following message will appear:
Webcam + Mic: Disabled