Users Guide

Setting up the monitor  │  43
Connecting the HDMI cable (optional)
NOTE: The graphics are used for the purpose of illustration only.
Appearance of the computer may vary.
Connecting the USB 3.0 cable
After you have completed conn
ecting the VGA/DisplayPort/HDMI cable, follow the
procedures below to connect the USB 3.0 cable to the computer and complete
your monitor setup:
1. Connect the upstream USB 3.0 port (cable supplied) to an appropriate USB
3.0 port on your computer. (See Bottom view for details.)
2. Conne
ct the USB 3.0 peripherals to the downstream USB 3.0 ports on the
monitor.
3. Pl
ug the power cables for your computer and monitor into a nearby outlet.
NOTE: Use the cable slot on the monitor stand to
organize the cables.
4. T
urn On the monitor and the computer.
If your monitor displays an image, instal lation is complete. If it does not display
an image
, see Universal Serial Bus (USB) specific problems.