Users Guide

62  │  Operating the monitor

When the monitor goes into power-save mode, the following message appears:

NOTE: The message may be slightly different according to the

connected input signal.

Activate the computer and wake up the

monitor to gain access to the OSD.

The OSD functions only in the normal operation mode

. If you press any button other

than the power button during the Active-off mode, the following message will

appear depending on the selected input:

Activate the computer and the monitor to gain access to the OSD.

NOTE: The message may be slightly different according to the

connected input signal.

If either VGA, HDMI, or DisplayPort input is

selected and the corresponding cable is

not connected, a floating dialog box as shown below appears.