Users Guide
操作顯示器 | 65
OSD 警告訊息
當顯示器不支援特定解析度模式時,會看到以下訊息:
The current input timing is not supported by the monitor display.
Please change your input timing to 3840x2160, 60Hz or any other
monitor listed timing as per the monitor specications.
這表示顯示器無法與從電腦接收的訊號同步。關於本顯示器可定址的水平和垂直頻
率範圍,請參閱解析度規格。建議模式為3840 x 2160。
停用 DDC/CI 功能前,會看到以下訊息:
The function of adjusting display setting using PC
application will be disabled.
Do you wish to disable DDC/CI function?
Yes
No
顯示器進入待機模式時,將出現以下訊息:
Going into Standby Mode
啟動電腦並喚醒顯示器以存取 OSD。
如果按電源按鈕以外的任何按鈕,將根據所選輸入出現以下訊息:
No DP Signal form your device.
Press any key on the keyboard to wake up.
If there is no display, press the monitor joystick
to select input source.