Switch User Manual

326 CDP Interoperability Commands
Syntax
show isdp neighbors {[ gigabitethernet unit/slot/port | tengigabitethernet
unit/slot/port | detail] }
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show isdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source
Route, S - Switch, H - Host, I - IGMP, r - Repeater
Device ID Intf Hold Cap. Platform Port ID
--------- ---- ----- ---- -------- -------
Switch 1/0/1 165 RI cisco WS-C4948 GigabitEthernet1/1
console#show isdp neighbors detail
Device ID Switch
Address(es):
IP Address: 172.20.1.18
IP Address: 172.20.1.18
Capability Router IGMP
Platform cisco WS-C4948
2CSPC4.XCT-SWUM2XX1.book Page 326 Monday, October 3, 2011 11:05 AM