Switch User Manual

User Interface Commands 1665
Command Mode
All command modes. In User EXEC mode, this command behaves identically
with the quit command.
User Guidelines
There are no user guidelines for this command.
Example
The following example changes the configuration mode from Interface
Configuration mode to User EXEC mode to the login prompt.
console(config-if-Gi1/0/1)# exit
console(config)# exit
console#exit
console>exit
User:
quit
Use the quit command in User EXEC mode to close an active terminal
session by logging off the switch.
Syntax
quit
Default Configuration
This command has no default configuration.
Command Mode
User EXEC command mode
User Guidelines
There are no user guidelines for this command.
2CSPC4.XCT-SWUM2XX1.book Page 1665 Monday, October 3, 2011 11:05 AM