Switch User Manual

Multicast VLAN Registration Commands 611
Syntax
mvr querytime 1–100
no mvr querytime
Parameter Description
Default Configuration
The default value is 5 tenths of a second.
Command Mode
Global Config
User Guidelines
The following table lists the completion messages.
Example
console(config)#interface Gi1/0/1
console(config-if-Gi1/0/1)#switchport access vlan 10
console(config-if-Gi1/0/1)#mvr
console(config-if-Gi1/0/1)#mvr type receiver
console(config-if-Gi1/0/1)#mvr mode dynamic
console(config-if-Gi1/0/1)#mvr querytime 10
Parameter Description
querytime The query time is a maximum time to wait for an IGMP
membership report on a receiver port before removing the port
from the multicast group. The query time only applies to
receiver ports. The query time is specified in tenths of a second.
Message Type Message Description
Successful Completion Message Defaulting MVR query response time.
Error Completion Message None
2CSPC4.XCT-SWUM2XX1.book Page 611 Monday, October 3, 2011 11:05 AM