Switch User Manual

104 Command Groups
mark cos Marks all packets for the associated traffic
stream with the specified class of service value
in the priority field of the 802.1p header.
PCMC
mark ip-dscp Marks all packets for the associated traffic
stream with the specified IP DSCP value.
PCMC
mark ip-precedence Marks all packets for the associated traffic
stream with the specified IP precedence value.
PCMC
match class-map Adds add to the specified class definition the
set of match conditions defined for another
class.
CMC
match cos Adds to the specified class definition a match
condition for the Class of Service value.
CMC
match destination-address
mac
Adds to the specified class definition a match
condition based on the destination MAC
address of a packet.
CMC
match dstip Adds to the specified class definition a match
condition based on the destination IP address
of a packet.
CMC
match dstip6 Adds to the specified class definition a match
condition based on the destination IPv6
address of a packet.
v6CMC
match dstl4port Adds to the specified class definition a match
condition based on the destination layer 4 port
of a packet using a single keyword, or a numeric
notation.
CMC
match ethertype Adds to the specified class definition a match
condition based on the value of the ethertype.
CMC
match ip6flowlbl Adds to the specified class definition a match
condition based on the IPv6 flow label of a
packet.
v6CMC
match ip dscp Adds to the specified class definition a match
condition based on the value of the IP DiffServ
Code Point (DSCP) field in a packet.
CMC
match ip precedence Adds to the specified class definition a match
condition based on the value of the IP.
CMC
Command Description Mode
a
2CSPC4.XCT-SWUM2XX1.book Page 104 Monday, October 3, 2011 11:05 AM