Switch User Manual

Loopback Interface Commands 1065
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Examples
The following examples display information about configured loopback
interfaces.
console# show interfaces loopback
Loopback Id Interface IP Address Received Packets Sent Packets
----------- --------- ---------- ---------------- ------------
1 loopback 1 0.0.0.0 0 0
console# show interfaces loopback 1
Interface Link Status.......................... Up
IP Address..................................... 0.0.0.0 0.0.0.0
MTU size....................................... 1500 bytes
2CSPC4.XCT-SWUM2XX1.book Page 1065 Monday, October 3, 2011 11:05 AM