Switch User Manual

Command Groups 107
Radius
Command Description Mode
a
aaa accounting network
default start-stop group
radius
Enables RADIUS accounting on the switch. GC
acct-port Sets the port that connects to the RADIUS
accounting server.
auth-port
Sets the port number for authentication requests
of the designated radius server
.
R
deadtime Improves Radius response times when a server is
unavailable by causing the unavailable server to
be skipped.
R
key Sets the authentication and encryption key for all
RADIUS communications between the switch
and the RADIUS daemon
.
R
msgauth Enables the message authenticator attribute to
be used for the RADIUS Authenticating server
being configured.
R
name Assigns a name to a RADIUS server. R
primary Specifies that a configured server should be the
primary server in the group of authentication
servers which have the same server name.
R
priority Specifies the order in which the servers are to be
used, with 0 being the highest priority.
R
radius-server deadtime Improves RADIUS response times when servers
are unavailable. Causes the unavailable servers
to be skipped.
GC
radius-server host Specifies a RADIUS server host. GC
radius-server key Sets the authentication and encryption key for
all RADIUS communications between the
switch and the RADIUS daemon.
GC
radius-server retransmit Specifies the number of times the software
searches the list of RADIUS server hosts.
GC
2CSPC4.XCT-SWUM2XX1.book Page 107 Monday, October 3, 2011 11:05 AM