Switch User Manual

1092 Multicast Commands
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC and Privileged EXEC modes
User Guidelines
There are no user guidelines for this command.
Example
(console) #show ip pim
Interface VLAN0010
Mode Sparse
Hello Interval (secs) 30
Join Prune Interval (secs) 60
DR Priority 1
BSR Border Disabled
Neighbor Count1
Designated Router 192.168.10.1
Interface VLAN0001
Mode Sparse
Hello Interval (secs) 30
BSR Border Whether or not this interface is configured as a BSR Border
Neighbor Count Number of PIM Neighbors learnt on this interface
Designated-Router IP address of the elected DR on the interface
Field Description
2CSPC4.XCT-SWUM2XX1.book Page 1092 Monday, October 3, 2011 11:05 AM