Switch User Manual

1112 OSPF Commands
Default Configuration
hello-interval
seconds
Number of seconds to wait before sending hello packets to the
OSPF virtual interface. (Range: 1–65535)
dead-interval
seconds
Number of seconds to wait before the OSPF virtual interface on
the virtual interface is assumed to be dead. (Range: 1–65535)
retransmit-interval
seconds
The number of seconds to wait between retransmitting LSAs if
no acknowledgement is received. (Range: 0–3600)
transmit-delay
seconds
Number of seconds to increment the age of the LSA before
sending, based on the estimated time it takes to transmit from
the interface. (Range: 0–3600)
md5 Use MD5 Encryption for an OSPF Virtual Link.
key Authentication key for the specified interface. (Range: 8 bytes
or less if the authentication type is simple and 16 bytes or less if
the type is encrypt.)
key-id Authentication key identifier for the authentication type
encrypt. (Range: 0–255)
Parameter Default
area-id No area ID is predefined.
router-id No router ID is predefined.
hello-interval
seconds
10 seconds
retransmit-interval
seconds
5 seconds
transmit-delay
seconds
1 second
dead-interval
seconds
40 seconds
authentication-key
key
No key is predefined.
message-digest-key
key-id md5 key
No key is predefined.
Parameter Description
2CSPC4.XCT-SWUM2XX1.book Page 1112 Monday, October 3, 2011 11:05 AM