Switch User Manual

OSPF Commands 1151
Example
The following example displays OSPF router information.
console#show ip ospf
Router ID................................ 1.1.1.1
OSPF Admin Mode.......................... Enable
RFC 1583 Compatibility................... Enable
External LSDB Limit...................... No Limit
Exit Overflow Interval................... 0
Spf Delay Time........................... 5
Spf Hold Time............................ 10
Opaque Capability........................ Disable
AutoCost Ref BW.......................... 100 Mbps
Default Passive Setting.................. Disabled
Maximum Paths........................ 4
Default Metric....................... Not configured
Default Route Advertise.............. Disabled
Always............................... FALSE
Metric............................... Not configured
Metric Type.......................... External Type 2
Number of Active Areas... 1 (1 normal, 0 stub, 0 nssa)
ABR Status........................... Disable
Distribute-List Shows the access list used to filter redistributed routes.
2CSPC4.XCT-SWUM2XX1.book Page 1151 Monday, October 3, 2011 11:05 AM