Switch User Manual

1362 Clock Commands
Command Mode
Global Configuration
User Guidelines
No specific guidelines
Examples
console(config)# clock summer-time recurring 1 sun jan
00:10 2 mon mar 10:00 offset 1 zone ABC
clock summer-time date
Use the clock summer-time date {date | month} {month | date} year
hh:mm
{date | month} {month | date} year hh:mm [offset offset ] [zone
acronym
] command to set the summertime offset to UTC. If the optional
parameters are not specified, they are read as either '0' or '\0', as appropriate.
Syntax
clock summer-time date {date | month} {month | date} year hh:mm {date
| month} {month | date}
year hh:mm [offset offset ] [zone acronym ]
• date — Day of the month. (Range: 1–31)
•
month — Month. (Range: The first three letters by name; jan, for
example.)
•
year — Year. (Range: 2000–2097)
•
hh:mm — Time in 24-hour format in hours and minutes. (Range: hh:
0–23, mm: 0–59)
•
offset — Number of minutes to add during the summertime. (Range:
1–1440)
•
acronym — The acronym for the time zone to be displayed when
summertime is in effect. (Range: Up to four characters)
Default Configuration
This command has no default configuration.
2CSPC4.XCT-SWUM2XX1.book Page 1362 Monday, October 3, 2011 11:05 AM