Switch User Manual

Command Groups 137
passive-interface default Enables the global passive mode by default for all
interfaces.
ROSV3
redistribute Configures the OSPFv3 protocol to allow
redistribution of routes from the specified source
protocol/routers.
ROSV3
router-id Sets a 4-digit dotted-decimal number uniquely
identifying the Router OSPF ID.
ROSV3
show ipv6 ospf Displays information relevant to the OSPF
router.
PE
show ipv6 ospf abr Displays the internal OSPFv3 routes to reach
Area Border Routers (ABR).
PE
show ipv6 ospf area Displays information about the area. PE
show ipv6 ospf asbr Displays the internal OSPFv3 routes to reach
Autonomous System Boundary Routes (ASBR).
PE
show ipv6 ospf border-
routers
Displays internal OSPFv3 routers to reach Area
Border Routers (ABR) and Autonomous System
Boundary Routers (ASBR).
UE or
PE
show ipv6 ospf database Displays information about the link state
database when OSPFv3 is enabled.
PE
show ipv6 ospf database
database-summary
Displays the number of each type of LSA in the
database and the total number of LSAs in the
database.
PE
show ipv6 ospf interface Displays the information for the IFO object or
virtual interface tables.
PE
show ipv6 ospf interface
brief
Displays brief information for the IFO object or
virtual interface tables.
PE
show ipv6 ospf interface
stats
Displays the statistics for a specific interface. UE
show ipv6 ospf interface
vlan
Displays OSPFv3 configuration and status
information for a specific VLAN.
PE
show ipv6 ospf neighbor Displays information about OSPF neighbors. PE
show ipv6 ospf range Displays information about the area ranges for
the specified area identifier.
PE
Command Description Mode
a
2CSPC4.XCT-SWUM2XX1.book Page 137 Monday, October 3, 2011 11:05 AM