Switch User Manual

Configuration and Image File Commands 1379
Command Mode
Privileged EXEC mode
User Guidelines
When copying files from the switch, match a source parameter with a
destination URL. When copying to the switch, match a source URL to a
destination parameter. FTP is only supported for image download to the
switch. URLs may not exceed 160 characters in length, including filename,
file path, hostname, ip address, user, and reserved keywords.
Examples
Example – Backing up the running-config
console#copy running-config backup-config
This operation may take a few minutes.
Management interfaces will not be available during
this time.
Are you sure you want to save? (y/n) y
Configuration saved!
Example – Downloading new code to the switch
console#copy tftp://10.27.65.61/PC7000v20100911_2.stk image
Transfer Mode.................................. TFTP
Server IP Address.............................. 10.27.65.61
File Path...................................... ./
File Name.................................. PCM7000v20100911_2.stk
Data Type...................................... Code
Local Filename................................. image
Management access will be blocked for the duration of the transfer
Are you sure you want to start? (y/n) y
2CSPC4.XCT-SWUM2XX1.book Page 1379 Monday, October 3, 2011 11:05 AM