Switch User Manual

1440 Password Management Commands
Syntax
show passwords result
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the command output.
console#show passwords result
Last User whose password is set ...................... brcm
Password strength check ........................... Enable
Last Password Set Result:
Reason for failure: Could not set user password! Password
should contain at least 4 uppercase letters.
2CSPC4.XCT-SWUM2XX1.book Page 1440 Monday, October 3, 2011 11:05 AM