Switch User Manual

1450 Power Over Ethernet Commands
The default guard band is 4% of maximum power supplied to the system.
Assuming a maximum current draw of 31.2W per device and the default
settings for PoE, the PC7024P can power 32 devices and the PC7048P can
power 31 devices with no DC power and more than 48 devices when using
DC power.
Syntax Description
power inline management { dynamic | static }
no power inline management
Parameter Description
Default Value
Default management is dynamic.
Command Mode
Global Configuration
power inline powered-device
The power inline powered-device Interface Configuration (Ethernet) mode
command adds a comment or description of the powered device type to
enable the user to remember what is attached to the interface. To remove the
description, use the no form of this command.
Syntax Description
power inline powered-device pd-type
PC7048P 794W 794W 1794W
Parameter Description
dynamic Dynamic power management
status Static power management
Switch Fixed Only EPS Only Both
2CSPC4.XCT-SWUM2XX1.book Page 1450 Monday, October 3, 2011 11:05 AM