Switch User Manual

System Management Commands 1589

Use the login-banner command to enable login banner on the console, telnet

or SSH connection. To disable, use the no form of the command.

Syntax

no login-banner

•

MESSAGE

— Quoted text

Default Configuration

This command has no default configuration.

Command Mode

Line Configuration

User Guidelines

This command has no user guidelines.

Example

console(config-telnet)# no login-banner

media-type

Select the media-type command for the interface. This command is only

valid on combo ports.

Syntax

media-type { auto-select [rj45 | sfp ] | rj45 | sfp }

Parameter Description

auto-select rj45 Utilize RJ45 media when both media types are active.

auto-select sfp Utilize the SFP media when both media types are active.

2CSPC4.XCT-SWUM2XX1.book Page 1589 Monday, October 3, 2011 11:05 AM