Switch User Manual

Using the CLI 181
Table 2-5. Navigating CLI Command Modes
Command Mode Access Method Command Prompt Exit or Access
Previous Mode
User EXEC The user is
automatically in
User EXEC mode
unless the user is
defined as a
privileged user.
console>
logout
Privileged EXEC Use the enable
command to enter
into this mode. This
mode is password
protected.
console#
Use the exit
command, or
press
<Ctrl>+<Z>
to return to the
User EXEC
mode.
Global
Configuration
From Privileged
EXEC mode, use
the configure
command.
console(config)#
Use the exit
command, or
press
<Ctrl>+<Z>
to return to the
Privileged EXEC
mode.
Line Interface From Global
Configuration
mode, use the line
command.
console(config-line)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
Management
Access-List
From Global
Configuration
mode, use the
management
access-list
command.
console(config-macal)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
2CSPC4.XCT-SWUM2XX1.book Page 181 Monday, October 3, 2011 11:05 AM