Switch User Manual

248 AAA Commands
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#clear aaa ias-users
enable authentication
Use the enable authentication command in Line Configuration mode to
specify the authentication method list when accessing a higher privilege level
from a remote telnet or console. To return to the default specified by the
enable authentication command, use the no form of this command.
Syntax
enable authentication {default | list-name }
no enable authentication
• default — Uses the default list created with the aaa authentication enable
command.
•
list-name — Uses the indicated list created with the aaa authentication
enable
command. (Range: 1-12 characters)
Default Configuration
Uses the default set with the command aaa authentication enable.
2CSPC4.XCT-SWUM2XX1.book Page 248 Monday, October 3, 2011 11:05 AM